Search results

oh ok so your pinion and crown was stuff to. mine had a little wear on it but he the second hand diff was in good condition so i'll you them

so has anyone pulled your diff apart to see whats going on? im actually in the process of getting my diff rebuild in my 06 d22. mine is only costing me about $2200. that's with all new bearings and brand new ARB diff lock. was pretty much the same price to get a locker as it was to get the...

yeah ok thanx. seems like I the crank angle sensor if the course of my drama. least I no I shouldn't be to expensive to fix.

ive got it booked into the mechanic on the 10th. what its doing now also is the tacho will dropout and the engine light will come on. ill turn the car off and start it again then engine light is out and tacho is normal. still throughing the code crank angle sensor though, no other codes. what...

so for a few weeks it has been running fine. but today it started again. was idling through a car park today and it just jerked and engine light come on and the rev gauge was dead but engine was still running. when I started it in wen I left after doing my shopping it did is rev spike again and...

ive also done the butter fly mod. I will say the catch can was close to being full but ive got a forefront catch can so I a got a pipe through the bottom of the can. I don't think the turbo is leaking oil. when I did a service yesterday it did check the impellor and it seemed like there was...

yeah ok. I let it idle for over 10 min today so I will just wait and see if that fixs it

ok thanx I will try that. I did to a ecu scan by putting the to wires over the terminals. I did come up with throttle position, intake temp sensor and crank angle sensor. but I don't no how long them codes could have been stored for like im talking maybe years so I wiped the codes and I checked...

Hi over the last while my 06 zd30 150ks sometimes had little rev spikes. sometimes i will start it and it will just rev to 2000rpm then just drop straight down to normal idle. but today just sitting at the set of lights in first gear with the clutch in it reved to about 2000rpm and then just...

i have the probe in my egr port on the exhaust manifold. ive got a race tech gauge. around down on average driving it would go anywhere up to 300-450. on high way average is about 400 - 450 but if u have to push it hard up and hill u can see up to 600 if u realy want to

ive got a probe in the exhaust egr port. works well saves you tapping into the exhaust manifold.

did you have to take the uni joint off at the back of the centre bearing to get the centre bearing off. because mine doesn't have a flange to take the tail shaft off at the centre bearing bit. mine is a 06 model. wat is urs?

so it fixed your problem? has anyone elc had this problem?

so u thought the new and old centre bearing has about the same amount of play? was it hard to change? what nut did u say way loose?

hey. ive had a vibration when I take off for quite some time now. I got a new clutch put in and also fly wheel machined. but still does it. I used to be able to take off smoothly with bugger all right pedal but now I have to give it a rev then let the clutch out to take off smooth. I have...

I made this bash plate. I fitted it up. but I have a 06 not sure wat the drawings were made for but none of the screw holes line up with anything. I just used tech screws but id like to do something that's a bit more heavy duty than that. wat have other people done?

im tossing up between a lot of tyres and everyone had something bad to say about al of them

so who elc is running the fun country tyres. im tossing up if I should buy them or not r they noisey?

oh ok thanx. that's good to hear

I was just under my ute today and I was just checking if my uni joints r ok. I was checking the first uni coming out of the gear box and I notiest a little play but it wasn't they uni its like the out put shaft of the gear box has play. im just wondering if this is normal or if a bearing has...