Peacheyqd32
PeacheyQD32T
Hello all,
Thought id make up a thread with my progress and some info I have found along the way.
So far I have bought 90% of the parts I need, waiting for most to arrive.
have gone with:
GBC22-350 turbo
Aeroflow 280x300x76mm intercooler to topmount
SAAS SG81803 turbo timer
Redarc G52-BET EGT, Boost and air temp gauge
Redarc G52-PWT Oil pressure, water temp, oil temp gauge
2x GS-OWT1-8 sensors
Provent copy catch can
I have made my own 2.5" 409 stainless
I have made my own exhaust manifold
I will also be making my own dump pipe with a 3" stainless bend and using a v-band to connect to the setup I started from the existing dump pipe.
Also planning on cutting the existing intake manifold and welding a 100x50x3 box section on with a 3" pipe for a silicone hose to attach to from the intercooler. I have tried to source a stock td27 intake but none of the wreckers want to sell the intake manifold separate I think this may be a good thing tho as the position of the factory turbo intake might not be in the right spot for my setup.
Ill also be buying a bonnet scoop once everything turns up and I begin to fit all the bits.
Ill just be relocating my factory air box, connecting straight to the snorkel at the guard and using a flexible hose and 67 degree 2.5" silicone bend.
Once the setup is all working and there are no issues on the hot side ill be getting the exhaust manifold, dump pipe and maybe the turbo hot side ceramic coated.
Here are a couple of photos of the progress so far. I have been test fitting some things with a TD04 turbo I have lying around.
Thought id make up a thread with my progress and some info I have found along the way.
So far I have bought 90% of the parts I need, waiting for most to arrive.
have gone with:
GBC22-350 turbo
Aeroflow 280x300x76mm intercooler to topmount
SAAS SG81803 turbo timer
Redarc G52-BET EGT, Boost and air temp gauge
Redarc G52-PWT Oil pressure, water temp, oil temp gauge
2x GS-OWT1-8 sensors
Provent copy catch can
I have made my own 2.5" 409 stainless
I have made my own exhaust manifold
I will also be making my own dump pipe with a 3" stainless bend and using a v-band to connect to the setup I started from the existing dump pipe.
Also planning on cutting the existing intake manifold and welding a 100x50x3 box section on with a 3" pipe for a silicone hose to attach to from the intercooler. I have tried to source a stock td27 intake but none of the wreckers want to sell the intake manifold separate I think this may be a good thing tho as the position of the factory turbo intake might not be in the right spot for my setup.
Ill also be buying a bonnet scoop once everything turns up and I begin to fit all the bits.
Ill just be relocating my factory air box, connecting straight to the snorkel at the guard and using a flexible hose and 67 degree 2.5" silicone bend.
Once the setup is all working and there are no issues on the hot side ill be getting the exhaust manifold, dump pipe and maybe the turbo hot side ceramic coated.
Here are a couple of photos of the progress so far. I have been test fitting some things with a TD04 turbo I have lying around.
Attachments
-
20221022_165836.jpg4.5 MB · Views: 2
-
20221023_162935.jpg1.1 MB · Views: 0
-
20221121_115605.jpg1.2 MB · Views: 0
-
20221227_153648.jpg2.8 MB · Views: 0
-
20230801_162154.jpg1.7 MB · Views: 0
-
20230804_142636.jpg1.5 MB · Views: 0
-
20230725_173011.jpg3.7 MB · Views: 0
-
20230727_163520.jpg1.1 MB · Views: 0
-
20230801_164149.jpg2 MB · Views: 0
-
20221022_101314.jpg2.1 MB · Views: 0
Last edited: