Lift on a new D22

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

cbb

Member
Joined
Feb 20, 2011
Messages
30
Reaction score
0
Hi all,

Anybody had a lift kit put on a new model D22 (common rail 2.5). I spoke to the local TJM blokes and they told me they would be able to get stuff all lift at the front because it's so new (t bar), it should be at the height it's going to be???

Any experience, idea's.
 
Two inch lift is most common many brands efs,ironman etc.
Can do three inch with aftermarket upper control arms in the front.
Do a search heaps of info on here.
I have a 2010 d22 2.5 I have wound up torsion bars until there's about 10mm gap from bump stop and fitted 2" rear leafs with 32" tyres does well
 
i have just brought a 2011 d22 and i just ordered my 3" superior lift should be coming soon, its gunna be sweet. comes with upper control arms torsion bars etc etc
 
I also have a new 2011 D22 and all i did was wind up the front torsion bars and made my own extended shackles with stock shockies. I don't go offroad often but it drives and handles fine.
 

Latest posts

Back
Top