http://www.ebay.com.au/itm/231285830634?_trksid=p2060353.m1438.l2649&ssPageName=STRK:MEBIDX:IT
Tube diameter is 51mm, using the above should let you use the 'L' brackets you already have.
Beware the useable (straight and level) section of these racks is only about 850mm at a stretch, most awnings require a minimum 900mm between mounts that are centrally located and account for about 400mm overhange at each end, meaning the suggested awning size is only 1200ish long.
Im in the same boat with the canopy and have decided to get roof racks on the cab instead.
Tube diameter is 51mm, using the above should let you use the 'L' brackets you already have.
Beware the useable (straight and level) section of these racks is only about 850mm at a stretch, most awnings require a minimum 900mm between mounts that are centrally located and account for about 400mm overhange at each end, meaning the suggested awning size is only 1200ish long.
Im in the same boat with the canopy and have decided to get roof racks on the cab instead.
