3/8 is just under 1/2 an inch, around 10mm. My question, is it worth it?3/8 would be nearly 20mm drop, that the same drop as a hilux drop kit (from memory), but 20mm (3/8) is going to be an improvement.
3/8 would be nearly 20mm drop, that the same drop as a hilux drop kit (from memory), but 20mm (3/8) is going to be an improvement.
This would only benefit d22 with calmini or similar arms. If you have standard 2" lift your cv angles aren't that bad as it's within factory specs.
As the bushes are pressed into the diff you will need to unbolt cvs and remove diff completely then press old bushes out and then install new bushes. Well thats whats required for the 4x4parts.com bushes
Enter your email address to join: