Recent content by 12vdc

fresh diesel Just limit pressure to less than 30psi or your plastic tank could baloon and probably crack.

^ Tap is a good idea, mind to share some images or what the valve looks like? What i did was tank cap with nipple. I think i already posted somewhere here, but i got the file copy link. hth.

For brakes and clutch Regularly stock cans of brake cleaner. Cleaning should be more frequent if you do lots of dunking in the mudwater. Keep an eye on the front caliper sliding pins as they really gets corroded and gets stuck. Use only silicone to lubricate brake parts as the petrol-based...

For coolant flushing Removing the Front Left wheel will give you better access to the engine drain plug, and if you need to remove the 3-bolts of the thermostat its very accessible in that spot. Use only premix coolant as possible because using your own distilled water could introduce...

For the air filter, regular inspection should be made for clogging. Clogged filter is one cause of Engine limping due to collapsed intake hose. Compared to fluid filters, air filters are single pass and do better filtration when stuffed with soil(at a certain level), you could clean it and...

Do your own filter analysis. This opened cans shows how asphaltines and wax buildup in the filter element after 10k kms. This is one way of knowing how you should often replace filters, and the cleanliness of pumps around you. For oil filtration, better if you could send oil samples to the...

Just limit pressure to 30psi or your tank could baloon..

For replacing fuel filters, fabricating this DIY tool could save you time and eliminate the use of priming bulb.

Download the user & service manual. Almost any basic service procedure is written there. Equip yourself with tools Follow the service interval

Sorry glen, late to notice yours is a d22. Its different from D40 as it is using serpentine. Anyhow below is the teardown for d22.

Replaced mine couple of months ago.

Hi folks, mine is Thai built. I'm just wondering what connector should i use for pins 49,50.. Since i don't have the outside connector in place, im assuming the harness going to the cluster meter has no wires crimped on it? Another in mind is this battery operated. Maybe just add dc-dc...

I find Baldwin better, larger surface area at 1/3 the price of Mann..

You have to loosen the brake adjuster. To access the adjuster, remove the rubber cap behind the brake plate assy, a flat screwdriver should do the job.