Recent content by tommyhodgkin

mine was wired, I just ran the wire between hood lining and roof, then down behind pillar plastic, cant remember where i went outside the cab, but then down to camera, also picked up the signal from the reverse lights so that when i put it into reverse it comes on automatically.

yeah i got one off ebay and it is great, its a good mirror too, you cant even notice that its a screen when switched off.

still for sale? $50 each?

Here's a few pics of my tray conversion from a holden rodeo tray from the wreckers to suite my nav, then a couple of my canopy build which is still ongoing.

yeah mine was a headgasket, but i was also getting a buildup of presure in the cooling system

yep same happened to me, but the engine management light came on and had to switch off and restart to get it to go away. switch was only about 60bucks from dealer and about a 20 minute job to fit by yourself. easy as ay!

hi sorry i know this is a very late reply, but this fits a 60amp hour battery and you have to move the fuel filter, I incorporatedd this as part of the tray...

how much was the system, if you dont mind me asking?

Yeah I have a couple made but a couple guys after them so it could take a couple weeks, I've got a bit on ATM, there $130 posted and I prefer direct deposit, pm me if you want to go ahead!

Hey mate 130 posted, that includes all bolts needed. Sorry for slow reply! New dad!

I mounted mine on the side of the dump pipe, there is a bolt that holds the heat shield on that has plenty of meat around it, I drilled out thread and tapped to required size, came up Mickey Mouse.see picture in my pictures

Hi, firstly sorry for the slow reply, the thermostat is located where the bottom radiator hose returns to motor. It bolts up from the front and is a bit of a bitch to get too. But you symptoms sound the same as mine and it turned out to be a very small leak in the head gasket between cylinder...

Hi mate, I had the same problem, was pushing water out of overflow and getting an airlock in radiator. I did a co2 test but it showed nothing. Replaced thermostat and radiator cap. No good. Bit the bullet and decided to pull it down as I suspected a cracked head. Stripped it down and got head...

And when ya put the new filter on for f/:)s sake don't over tighten it lol, lubricate oring on top and do it up till it just touches, then a 3rd of a turn more. Trust me it won't come loose/leak and you won't have this problem next time!