Recent content by Nafen

Thanks for the info fellas, i only just remembered i asked this :cheers!:

Dave, have you got a part number for the part ive marked in the attached image? Cheers Nafen

Dont stress about it mate, the XR6 cooler is plenty big enough and it can handle the FLOW of the little girly turbo on the navara, boost level has nothing to do with it.

Hey Dave, Yeh just dloaded the manual again, the one i had was the old one. Spoke to Northside this morning and they were extremely helpful and im trying a few things and then if it continues to happen ill put a scope on the cas. Cheers, Nafen

Hi fellas, Chasing an issue on my ZD30 powered Nav which has been happening on and off for way too long now. Ive been trying to make it completely fail so i can find the problem but at that point it just starts up and runs again. So searching here and i found this quote from Northside in...

In that type of situation there would be little to no differnce, with a top mount you have all the engine heat rising at low speeds trying to escape out the top of the engine bay anywhere it can and a tiny little fan blowing some air over the core which is already red hot and heat soaked. The...

Thats cause there is stuff all pipework. Top mounts are a waste of time, if you are going to keep it in the engine bay you are much better off with a W2A.

That price is amusing

I bought a new turbo for my mates Nav from Nissan for $770, he bought it with a blown turbo which was caused by someone kinking the oil feed line which is a pretty common problem. They are only a standard bush bearing setup you can rebuild for next to nothing, theres nothing fancy about them at...

If you could invent more time in a day that would fix the problem:big_smile: To change the air filter i just pop the pipe off thats in front of it, it is just the 2 t-bolt hose clamps and pipe comes straight off. If i wasnt running the factory crossover pipe i would have made the pipe go under...

I planned to make a few its just a matter of finding the time to do so.

Any intercooler will work its just a matter of getting it into a position that receives good air flow and makes use of it. If you already have that cooler and dont have to purchase it then use it but if you are buying it then there are ones that flow/cool much better that. The pipe work is the...

I have the standard Nissan snorkel too, im just going to cut and shut a few pipes when i get around to fitting it.

Yeh mate i removed the cyclone filter cause i have a snorkel to fit up which will go straight to air box. Had to enlarge the hole under the cyclone filter to run the pipe thru, there are ways around it but you end up with very long pipes. The main difference it makes is on big long uphills when...

Hey mate, I did the pipes and stuff myself just borrowed a mates tig and tacked it all together and he welded it all up. The bends are all cut from alloy donuts to suit. I made it so if i want to return it to standard or the cooler gets damaged while im in the bush i can just flip the factory...