Recent content by fixer941

Need a little help. Over the last few days the bolts on my starter keep backing out and it won't grab and start, no biggie, l'm flat out at work and can't get under there to fix it. However, this morning my oil light was pulsing and flashing then half way to work it came on steady, checked the...

yeah, thought it was odd, might need to replace them as the shock slips between the two holes on braking. some people should need to apply for a license for power tools l swear!

So l went under the slug to replace a flogged out upper shock mount and l noticed that the hole it goes through is like two holes together looking like a figure 8, is this correct?

I'll go for one, pm me your details to pay, or dependi g on where in melb i can pick up and pay cash next Tuesday

any left?

So my d22 wheel is perishing so I figured the best way forward for me would be putting a d40/patrol/xtrail wheel in with the radio controls, does anyone know if the fitment is the same across the platforms? I would imagine it would just come down to splines

Didn't change anything, though i noticed the bolt holding the actuator bracket is missing and the bracket is sitting an inch or so away from the turbo housing, that might do it i think.

true that, next day off i will pull the turbo and dump i guess and re mount them. egr pipe seems fine for leaks.

didn't actually remove turbo to do it, i just popped the old dump off and dropped it out the bottom, a poor seal from the turbo to the dump wouldn't affect boost would it?

Alright, here goes............On the weekend I replaced my factory exhaust with a playtime 3" (can't believe it took me so long to do it, what a difference!) anyhoo, since the change I have gone from 16lb boost down to 9lb and i am stuck. Its a chinese cheapie turbo for the record. Today I...

hi adamp, i've just moved to Hobart from Perth and only been here a few months. would be good to get a few members together down here for a day out. The motor only has 3000km on it. apparently there is oil being spat out from the breather tube though so probably not the screen filter...

just wondering if my 04 zd30 has a pcv? the reason i ask is that my nav which has now been christened "the t'nuc" apparently has extreme blowby, it has only 3000k on a rebuilt motor and has blown the rocker cover gasket and the seals around the injector ports. i don't have access to the...

Having done the fuel drop for the capricorn road house, i know why it costs so much for fuel out there, worth every cent though. I cant wait to get the d22 properly speced up and do the full length

So its all fixed, it turns out that the chinese turbo i bought was overboosting (20lb)because of the actuator so we swapped to the oem actuator giving me 16lb boost, however at 16lb the boost sensor was giving a voltage reading over spec and the ecu was cutting fuel to the motor. 3 washers to...

I'm just glad to have it back on the road after 9 months, its still 6kw down but i can live with that