shop deals on amazon

Shop deals on ebay

Advertise with us

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.

I punched holes in the return section of rubber to help soften the vibration in through the bonnet.. With two layers of the 3mm inserted rubber it's a

[No title]

[No title]

I may yet cut and remove the "return" section of rubber that has the holes in it "now that it had some heat in it and has formed it's shape and seal"-

I punched holes in the return section of rubber to help soften the vibration in through the bonnet.. With two layers of the 3mm inserted rubber it's a

The bonnet insulation is very fragile when you get away from the edges so I stiffened it up with a few coats of "thinned" "under body protection"..

I punched holes in the return section of rubber to help soften the vibration in through the bonnet.. With two layers of the 3mm inserted rubber it's a

vicszd30
Sep 9, 2015

There are no comments to display.