Go Back   The Navara Forum > D22 > D22 Electrical

Reply
 
Thread Tools Display Modes

Drivers Door master actuator
  #1  
Old 13-08-2019, 06:01 AM
Oldie's Avatar
Oldie Oldie is offline
Senior Member
 
Join Date: Sep 2014
Location: Fremantle WA
Posts: 322
My Mood:
Default Drivers Door master actuator

Been having trouble with the keyless locking. Will lock but not unlock.
The old actuator has 3 wires but the new one I've just bought has 5 wires.
Is the 3 wire a Nissan part or just an old after market job.
My old gal is a 2003 D22 and I'm not sure if the system was factory or after market.
I can't find anything in the mongrel workshop manual that will help so, does it mean working out which 3 wires of the new actuator are the only ones used.
Cheers
__________________
Never believe life begins at 40, it's actually just a rapid decline to old age LOL
Standard 2003 duel cab ZD30, TJM Snorkel, Forefront winch version intercooler, no lift but set of iron man plus helpers on rear springs. Standard 265/70/16 wheels & AT tyres, GME TX3120S UHF radio, StrikerB2 aerial for mobile phone.
Reply With Quote
Sponsored Links

  #2  
Old 13-08-2019, 10:37 AM
bods's Avatar
bods bods is offline
Advanced Member
 
Join Date: Sep 2010
Location: Orelia, WA
Posts: 4,930
Default

I can't recall whether the D22 ever came with factory remote locking, I don't think it did. The old one is probably an aftermarket slave one, I know the one Nissan fitted to mine is because from the factory driver's side door is the only one that operates the central locking.

All they did was fit a slave actuator that locks and unlocks the driver's door, which then locks and unlocks the other 3.

I would say the 3 wire one has an earth, an unlock signal wire and a lock signal wire. They should be different colours with any luck. The 5 wire one you have now is obviously a master because it should have an output wire to send signal to the slave actuators to lock when you press the button, if it was retro fitted to a vehicle that did not have central locking already. Hopefully 3 of the 5 wires are the same colour and it should work correctly...

You can probably google for a basic wiring diagram and hopefully that will show the way they work, bit without knowing brands or where you got it from that's about all I can say... Good luck.
Reply With Quote

  #3  
Old 13-08-2019, 12:26 PM
Oldie's Avatar
Oldie Oldie is offline
Senior Member
 
Join Date: Sep 2014
Location: Fremantle WA
Posts: 322
My Mood:
Default

Hi Bods
The new actuator is a Mabuchi Master actuator.
I do have a spare Mabuchi slave but it's only 2 wires.
I got them from Jcar.
I'll have to unwrap the insulation to see what colours the original 3 wires are.
Oh what fun hahaha at least I can still use the key to lock/unlock LOL
Cheers
__________________
Never believe life begins at 40, it's actually just a rapid decline to old age LOL
Standard 2003 duel cab ZD30, TJM Snorkel, Forefront winch version intercooler, no lift but set of iron man plus helpers on rear springs. Standard 265/70/16 wheels & AT tyres, GME TX3120S UHF radio, StrikerB2 aerial for mobile phone.
Reply With Quote

  #4  
Old 13-08-2019, 01:46 PM
bods's Avatar
bods bods is offline
Advanced Member
 
Join Date: Sep 2010
Location: Orelia, WA
Posts: 4,930
Default

Ah fun and games. Might just be a bad connection with the one that's in there at the moment. Let us know how you go anyway...
Reply With Quote

  #5  
Old 15-08-2019, 10:31 AM
Oldie's Avatar
Oldie Oldie is offline
Senior Member
 
Join Date: Sep 2014
Location: Fremantle WA
Posts: 322
My Mood:
Default

Will do. Next week, no rain and I can sit in the sun shine and do it LOL
__________________
Never believe life begins at 40, it's actually just a rapid decline to old age LOL
Standard 2003 duel cab ZD30, TJM Snorkel, Forefront winch version intercooler, no lift but set of iron man plus helpers on rear springs. Standard 265/70/16 wheels & AT tyres, GME TX3120S UHF radio, StrikerB2 aerial for mobile phone.
Reply With Quote

  #6  
Old 15-08-2019, 11:01 AM
bods's Avatar
bods bods is offline
Advanced Member
 
Join Date: Sep 2010
Location: Orelia, WA
Posts: 4,930
Default

Yeah tell me about it ...
Reply With Quote

  #7  
Old 19-08-2019, 07:46 AM
Oldie's Avatar
Oldie Oldie is offline
Senior Member
 
Join Date: Sep 2014
Location: Fremantle WA
Posts: 322
My Mood:
Default

As the old saying goes, measure twice and cut once.
So before I messed around with the actuator, I had a good look at what movement there was. I'll look better next time.
The actuator rod was moving inside the little clamp gizmo even with the grub screw in as tight as it would go.
So I've used the rod clamp from the new actuator kit and it is working fine for now. it's got me stumped but it appears the hole in the clamp has rounded out with constant movement, the bit that clamps onto the door rod is ok.
So if anyone knows where I can buy the metal clamps, I might need a few as spares. Saves me buying a whole new actuator kit hahaha
Cheers
Attached Thumbnails
Click image for larger version

Name:	2a.JPG
Views:	9
Size:	60.4 KB
ID:	22628  
__________________
Never believe life begins at 40, it's actually just a rapid decline to old age LOL
Standard 2003 duel cab ZD30, TJM Snorkel, Forefront winch version intercooler, no lift but set of iron man plus helpers on rear springs. Standard 265/70/16 wheels & AT tyres, GME TX3120S UHF radio, StrikerB2 aerial for mobile phone.
Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump



All times are GMT +1. The time now is 07:19 AM.



Powered by vBulletin® Version 3.8.7
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
| Home | Register | FAQ | Members List | Calendar | Today's Posts | Search | New Posts |