Search results

Nissan Navara Forum

Help Support Nissan Navara Forum:

This site may earn a commission from merchant affiliate links, including eBay, Amazon, and others.
  1. L

    D40 engine problem

    Over exaggerated a little
  2. L

    D40 engine problem

    Took the bloody thing for a drive a big drive today in limp mode. Took about 30kms of driving like a granny and it finally went back to normal but the dpf light is still on and I was getting 70L/100km's for my fuel economy lol So to me the thing is stuck in regen mode and continuously pumping...
  3. L

    D40 engine problem

    Well I think it started after start ya bastard was used to start it, maybe that damaged the maf sensor or something? Could that cause it to stall and blow diesel? But that doesn't explain to why the DPF light is on. If I do the accelerator trick and get the engine light code how do I identify...
  4. L

    D40 engine problem

    Yeah I tried resetting it with the throttle but that didnt help. Does limp mode usually make it stall and blow heaps of diesel out the exhaust?
  5. L

    D40 engine problem

    It's recently been stalling and running like a dog when it's cold, so I replaced the scv. It had a fuel problem somewhere and wouldn't start so start ya bastard was used. I tried restarting the ecu by taking the battery terminals off and doing the accelerator thing. Now it starts normally but I...
  6. L

    D40 engine problem

    It's 2010 model, start ya bastard was used to start it and I think it put it in limp mode. The car has absolutely no power and stalls if you don't rev it. I have the dpf filter and 4wd dash lights on then an engine light when it stalls. It has me stumped, what could the problem be?
  7. L

    D40 not running properly while cold

    I think there already is one on here. I swear I seen it before
  8. L

    D40 not running properly while cold

    They're the same aren't they? Same part number.
  9. L

    D40 not running properly while cold

    It was easy to take out, just undo the bolt on your dipstick and move it aside. Then there's just 2 Allen key headed bolts on the scv and a plug on the back.
  10. L

    D40 not running properly while cold

    Just brought the suction control valve today, should here next week. Il let you's know how it goes
  11. L

    D40 not running properly while cold

    Yeah I thought the same thing, but apparently unscrewing the fuel cap will let you know if it's working or not? I'm not sure how. And the way it needs to be primed before startup makes me believe it might be sucking air in somewhere.
  12. L

    D40 not running properly while cold

    A mates 2010 D40 has had an issue of running like a dog and stalls unless it's being revved when it's cold As soon as the engine is warm it runs perfectly. A mechanic replaced the injector pump but it didn't solve anything ($5000 later). After a bit of searching around the forum I tried...
Back
Top