Hi all,
Just after people’s experience of towing a 1800kg caravan with a 2012 D40 manual? (Ute typically doesn’t have any load in the tray, just a cover)
And if WDH will be required?
Thx
Matt.
So spent the $9 for 3m of 4mm vac tube from Repco, glad I did as I found the end of the vac tube that attaches to the turbo control actuator to be quite bad, see attached pic, rest of the hoses where In good condition but replaced them anyhow.
Surprised the mechanic didn’t pick it up, even...
Just going to test this, see attached diagram, red line, is this what you mean for me to try? Just bypass completely.
Might even pull the BCS out follow the instructions in the manual to double check if it has failed, by applying 12v and checking if Air goes thru each port correctly. Doubt this...
> BCS
I will investigate a bit more, might pull it out and see if it is working but at idle I can see the boost lever on the turbo moving up and down slowly.
> reset the fuel learning
done multiple times.
I was just looking at the vacuum hose drawings in the manual and noticed that there...
Thx Tony.
BCS was replaced a year ago I believe, but will check, boost seems fine though, see below.
Ran that app and it was peaking about 18/19psi when driving hard.
As mentioned I’m not noticing any loss of power, just has a brief puff of smoke when you accelerate hard. Enough that...
Hi All,
Wondering if you can help with a 2012 D40 (200,000kms) that is blowing black smoke on fast acceleration, it has plenty of power and not showing any other symptoms.
Things done/replaced over the past 2-months (no particular order);
- MAF cleaned.
- Vacuum hoses all checked.
- Injectors...
Hi all, new to this forum and new to Navara's and diesel engines as well :confused2:
I have a 2012 D40 with 200,000 on the clock and looking for a good mechanic in Melbourne that has done work on Navara's before and won't waste my time/money!
I live near Ferntree Gully, any recommendations...