I worked it out. Take the bolts off (5 on windscreen side, 2 each (4) on sides). Use car jack to remove middle bar which has sealer glue and pry sides with a flat screw driver tapping it with a hammer. You will need a grinder to get at windscreen bar side bolts. It will then come off completely...
Hi. Does anyone know how to remove the poxy steel sports bar that comes standard with the 2007 Spanish RX model? It looks like some bolts are attached and they've used some kind of filler in between before painting the vehicle.
Wiring in Bullbar
Thanks mate I have ordered a pair off fleabay for $3 hope this works. Unfortunately you can't put them in the headlight because it has a reverse polarity compared to standard sockets but should be right in the bullbar.
Wiring ARB Bullbar lights
Hi Unfortunately that plug is for the foglights only and may not be relevant if your vehicle doesn't have that feature. You are correct in thinking that you'll have to splice it into the existing wires behind the headlight. Let me know if your dash indicator light...
Towbar
Just keep trying fleabay you will eventually snag one. Make sure you know the type of chassis you have because the bar will vary depending on this. Eg I ended up getting one on fleabay for my Spanish D40 for $150. It was perfect fit and simple to install. Cost me another $70 to get auto...
Hi
I was wanting to put Ladder Racks on my 2007 D40 Spanish RX model. The rear one seems straightforward enough but the centre one has thrown me?? Don't know if I can just add the top rail to the existing roll bar or do I need to also get a sports bar because this model didn't come with one...